AUTO SPLICER
AUTO PAPER SPLICER
Joins the tail of an expiring paper roll to a fresh roll on the fly, matched to a swing-type hydraulic shaftless mill roll stand — so your corrugated roller machine line never has to stop for a roll change.
1,500 mm
MAX. PAPER DIAMETER
180 m/min
STANDARD UNWIND SPEED
~3 sec
UNWIND (SPLICE) TIME
300 m/min
OPTIONAL SERVO SPEED
The Auto Splicer joins the tail of an almost-empty paper roll to the leading edge of a fresh roll while the line keeps running — so the single facer feeding your corrugated roller machine never has to pause for a manual roll change.
Hsieh Hsu has engineered wet-end stations for corrugated roller machine lines since 1980. The Auto Splicer is designed to work together with a swing-type hydraulic shaftless mill roll stand: while one roll unwinds and feeds the line, the next roll is staged and ready, and the splicer joins the two at running speed.
In standard configuration, the Auto Splicer handles paper rolls up to 1,500 mm in diameter at an unwind speed of 180 m/min, completing a splice in roughly 3 seconds. For plants running faster lines, an optional full-servo upgrade lifts splicing speed to 300 m/min.
SPLICING ON THE FLY, MATCHED TO MILL ROLL STAND
The Auto Splicer is built to hand off between rolls without breaking the web — keeping your corrugated roller machine running while a roll change happens behind the scenes.
AUTOMATIC FLYING SPLICE
Joins the tail of the running roll to the leading edge of the next roll at speed — no stop, no manual join.
SWING-TYPE STAND MATCHED
Designed to pair with a swing-type hydraulic shaftless mill roll stand, so the incoming and outgoing rolls are always positioned correctly for the splice.
1,500MM MAX. PAPER DIAMETER
Handles paper rolls up to 1,500 mm in diameter in the standard configuration.
180 M/MIN STANDARD UNWIND
Runs at a standard unwind speed of 180 m/min, matched to typical corrugated roller machine line speeds.
~3 SECOND SPLICE TIME
Completes a splice in approximately 3 seconds, minimizing the paper lost during a roll changeover.
OPTIONAL FULL-SERVO 300 M/MIN
Upgrade to a full-servo splicing system for lines running up to 300 m/min.
TECHNICAL SPECIFICATIONS
Figures below reflect the standard configuration.
| COMPATIBLE STAND TYPE | Swing-type mill roll stand |
| MAX. PAPER ROLL DIAMETER | 1,500 mm |
| STANDARD UNWIND SPEED | 180 m/min |
| UNWIND (SPLICE) TIME | Approx. 3 seconds |
| OPTION — HIGH-SPEED SPLICING | Full servo, 300 m/min paper splicing |
