N.C. SCORER SLITTER(DOWN SLITTING TYPE)RRLB-4SB, RRLB-5SB, RRLB-6SB, RRLB-7SB
Our N.C. Slitter Scorer (Down Slitting Type) is engineered for high-speed corrugated board production lines, providing accurate slitting and scoring with fast order changes and reliable long-term operation.

Integrated into a Complete Corrugated Board Production Line
Installed after the Double Backer, the N.C. Slitter Scorer performs precise slitting and scoring before the cut-off section. Its automated positioning, fast order changes, and stable operation help maintain consistent board quality and support efficient production across the entire corrugator line.

Key Features
Down Slitting Design for Cleaner Cuts
The single-blade down slitting design improves cutting accuracy while reducing fish-tail defects on the printed surface of corrugated boards. A 270 mm slitting blade provides stable cutting performance, with a minimum slitting width of 175 mm.
Independent Motorized Blade Adjustment
Each slitting blade is driven by an independent motor, allowing precise blade positioning and entry adjustment according to board thickness. The system automatically receives production parameters from the production management system for faster setup and consistent results.
Automatic Blade Grinding System
Every slitting blade is equipped with an independent grinding and lubrication system. Grinding intervals and duration can be programmed through the control system or operated manually to maintain clean cutting performance and extend blade life.
Precision Scoring System
The double-scoring structure combines linear bearings, ball screws, and pneumatic depth adjustment for accurate scoring. Three lower scoring wheel configurations are available to accommodate different corrugated board requirements.
Fast Order Change
Motorized positioning enables slitting and scoring adjustments within 1–13 seconds. The control system stores up to 999 production orders, allowing quick recall and minimizing setup time.
Seamless Corrugator Integration
The machine synchronizes with the Double Backer through an AC inverter drive system, enabling continuous production without stopping the line during order changes. A motorized web suction system and ±75 mm lateral movement help maintain accurate board alignment.
Multiple Configuration Options
| Slitting Capacity | Slitting Blades | Total Scoring Lines |
| 4 OUT | 5 | 8 |
| 5 OUT | 6 | 10 |
| 6 OUT | 7 | 12 |




